Fiat Punto Radio Code — Unlock It Online

If your Fiat Punto is displaying CODE or sitting in silent protest after a battery change, you need your radio unlock code. The good news: every Punto manufactured between 1999 and 2018 uses a standard anti-theft code system, and retrieving that code online takes only a few minutes once you have the serial number to hand.

Fiat fitted the Punto with OEM radios built by Continental / Blaupunkt and Pioneer / Blaupunkt, carrying the Blue&Me or standard CD head units. The radios typically carry a serial prefix starting with BP (Blaupunkt-manufactured) or no prefix at all on Continental units. Before you can retrieve your code, you need that serial number.

Why Does the Fiat Punto Radio Lock?

The radio locks whenever power is interrupted — whether from a flat battery, a disconnected terminal during servicing, or a fuse failure. This is a deliberate theft-deterrent. The radio stores a lock state in its non-volatile memory, and only the correct 4-digit code will release it. Without the code, the unit is essentially useless to a thief.

Most Punto radios allow up to a set number of incorrect entries before entering a time-lock state. If you see WAIT or the display goes blank, leave the ignition in position I (accessories on) for one hour, then try again.

Finding Your Fiat Punto Radio Serial Number

There are two main ways to find your Punto's radio serial number:

1. Button combination: On most Punto radios, press and hold preset buttons 1 and 6 simultaneously with the radio powered off. The serial number scrolls across the display. If that does not work, try pressing and holding 1 and 4.
2. Physical label: Remove the radio from the dashboard using a set of DIN extraction keys (two pairs of 4 mm keys). The serial number barcode label is on the top or side of the unit. Note the full number including any letter prefix.

Once you have the serial, look up your Fiat model on our brands page to confirm compatibility and place your order.

How to Get Your Unlock Code

With the serial number in hand, visit MyRenaultRadioCode.com and enter it into the online form. Our database covers the full Punto range — from the classic Punto II (188) right through to the final 199 facelift built until 2018. After a short processing time, your unique 4-digit code is delivered by email. The entire process typically takes under ten minutes.

How to Enter the Code

Once you have your 4-digit code, follow these steps:

1. Turn on the ignition to position I (accessories on — engine off).
2. Turn on the radio. It should display CODE.
3. Use preset buttons 1, 2, 3 and 4 to enter each digit in sequence. Each press cycles the digit upwards.
4. Press and hold button 5 (or the OK/select button, depending on the head unit) to confirm.
5. The radio unlocks immediately and returns to normal operation.

If the display shows ERR after entry, you have entered the code incorrectly. Do not attempt again immediately — wait 30 minutes to avoid triggering a longer lockout.

Punto Generations at a Glance

Generation	Years	Chassis Code	Typical Radio	Serial Prefix
Punto II	1999–2003	188	OEM CD (Continental/Blaupunkt)	BP / —
Punto Classic	2003–2010	188	OEM CD / Blue&Me	BP / —
Grande Punto	2005–2009	199	Blue&Me / OEM CD	BP / —
Punto Evo	2009–2011	199	Blue&Me	BP / —
Punto (199 facelift)	2011–2018	199	Blue&Me / OEM CD	BP / —

Troubleshooting Common Error Messages

Fiat Punto radios can display several different error states. Here is what each means:

• CODE — Normal lock state. Enter your 4-digit code to unlock.
• ERR — Wrong code entered. Wait 30 minutes before trying again.
• WAIT — Too many incorrect attempts. Leave ignition in position I for one hour.
• LOCKED — Permanent lockout after repeated failures. Contact a Fiat dealer with proof of ownership for a manual override.

Frequently Asked Questions

Where is the radio serial number on a Grande Punto?

On the Grande Punto (199 chassis, 2005–2009), try pressing and holding presets 1 and 6 with the radio switched off but ignition on. The serial scrolls across the display. If this does not work on your specific head unit, the serial is printed on a white barcode label on top of the unit — visible only after removal with DIN extraction tools.

Will a second-hand Punto radio need a code?

Yes. Any time a Fiat OEM radio loses power — even briefly — it reverts to its locked state. A second-hand unit will also carry its own unique serial number and will need the corresponding code retrieved for that specific serial, not the code from the previous vehicle.

My Punto radio shows WAIT — how long do I need to wait?

The standard wait period after too many incorrect code attempts on Fiat OEM radios is one hour with the ignition held in the accessories position. After the hour, the display should return to CODE and you can try again.

Does the Punto Evo use a different code system to the Grande Punto?

Both the Punto Evo (2009–2011) and the Grande Punto (2005–2009) used the same Continental and Blaupunkt-sourced head units on most trim levels. The code retrieval process is identical — serial number in, 4-digit code out. The only variable is which radio model was fitted, so check your serial prefix.

Can I get the Fiat Punto radio code from a dealer?

Yes, but Fiat dealers will typically charge a fee and may require you to bring the vehicle in. Retrieving the code online via MyRenaultRadioCode.com is faster, available 24/7, and works without a dealership appointment.

Ready to unlock your Fiat Punto stereo right now? Visit our radio code lookup page, select Fiat, enter your serial number, and receive your code by email in minutes.