Peugeot 208 Radio Code — Unlock It Online
Your Peugeot 208 radio is showing CODE or has gone completely silent after a battery change. This is the standard anti-theft response built into every 208 since the model launched in 2012, and unlocking it requires only one thing: the 4-digit code tied to your specific radio's serial number. This guide explains exactly how to find that serial, retrieve the code online, and enter it correctly — for both the original 208 I and its 2015 facelift.
Why the Peugeot 208 Radio Locks
Peugeot fitted the 208 with a power-loss security lock as standard. The moment the radio loses its 12V supply — through a flat battery, a disconnected terminal, or electrical work — it stores a lock flag in internal memory and demands the code on next power-up. This means even a brief disconnection during a battery replacement will trigger it.
The 208 I (2012–2015) was predominantly fitted with the RCC or RCZ Touchscreen head unit, manufactured by Bosch/Clarion. The 208 I facelift (2015–2019) carried updated versions of the same platform. Both variants use a combination of physical buttons and touchscreen input for code entry. After too many wrong attempts the unit enters a temporary lockout — typically allowing up to 10 attempts before imposing a wait period.
Finding Your Peugeot 208 Radio Serial Number
Peugeot uses a C7 barcode label system for radio serial numbers. Here are your options:
- Button combination: With the radio switched off, press and hold preset buttons 6 and the source/list button simultaneously (or buttons 1 and 4 on older trim levels). The serial number scrolls across the display or appears on the touchscreen.
- Physical C7 barcode label: Remove the head unit from the dashboard. The serial is printed on a white C7 barcode label on the casing, usually on the top or rear of the unit. DIN extraction keys are needed.
- Vehicle documentation: Some 208s were supplied with a code card in the wallet of documentation — check your service pack.
Once you have the serial number, visit our Peugeot radio code lookup page to place your order.
Retrieving Your Code Online
Submit the serial number at MyRenaultRadioCode.com. The system covers all 208 I and 208 I facelift variants — RCC, RCZ Touchscreen, and related Bosch/Clarion units. Your unique 4-digit code is delivered by email, typically within minutes. Save the code somewhere secure for future use.
How to Enter the Code on a Peugeot 208
Entry method depends slightly on your 208's head unit:
- Turn ignition to position I (accessories on).
- Switch on the radio. CODE appears on the display.
- Buttons model: Use preset buttons 1–4 to cycle each digit to the correct number. Press and hold the 5 or OK button to confirm.
- Touchscreen model: A numeric keypad appears on the screen. Tap each digit of your code in sequence, then press OK or Validate.
- The radio unlocks immediately and returns to normal function.
Peugeot 208 Generations and Radio Overview
| Generation | Years | Head Unit | Manufacturer | Max Attempts |
|---|---|---|---|---|
| 208 I | 2012–2015 | RCC / RCZ Touchscreen | Bosch/Clarion | 10 |
| 208 I facelift | 2015–2019 | RCC / RCZ Touchscreen (updated) | Bosch/Clarion | 10 |
Troubleshooting Error Messages
- CODE — Normal locked state; enter your code.
- ERR — Incorrect code entered; remaining attempts may be displayed.
- WAIT — Temporary lockout after too many wrong entries. Leave the ignition in accessories mode for at least one hour before trying again.
- SAFE — Some Peugeot/Bosch units use SAFE to indicate the temporary lock state; same resolution as WAIT.
Frequently Asked Questions
How do I find the serial number on a Peugeot 208 without removing the radio?
On the majority of 208 models, pressing and holding preset buttons 1 and 4 (or 6 and the source button) while the radio is powered down displays the serial on screen. If this does not work, the C7 barcode label on the unit itself is the only other source — which does require partial removal of the head unit.
My Peugeot 208 radio says WAIT — what should I do?
The WAIT message means you have exceeded the allowed number of code attempts (typically 10 on 208 models). Leave the ignition switched to position I for a full hour without attempting entry. After the hour, the display reverts to CODE and you can try again. Make sure you have the correct code before your next attempt.
Does the Peugeot 208 I facelift (2015–2019) use a different code to the original 208?
The code retrieval process is the same — both generations use a serial-based 4-digit code tied to the specific radio unit. The facelift's updated Bosch/Clarion head unit follows an identical unlock procedure; only the on-screen interface differs slightly between the button-press and touchscreen variants.
Can I use the same code if I replace the 208 radio with a second-hand unit?
No. Each head unit has its own unique serial number, and the code is tied to that serial. If you fit a replacement radio, you will need to retrieve the code for that unit's specific serial number, regardless of which car it previously came from.
Ready to get back on the road with music? Get your Peugeot 208 radio code now — enter your serial number and receive your 4-digit unlock code by email in minutes.