Vauxhall Insignia Radio Code — Unlock It Online
A battery change on a Vauxhall Insignia almost inevitably produces a locked radio. The head unit shows CODE and stays silent until you enter the correct PIN. Whether you have an Insignia A (2008–2013), the facelifted A (2013–2017), or an Insignia B (2017–2022), this guide will walk you through finding your serial number and getting your unlock code fast.
Why Does the Vauxhall Insignia Radio Lock?
Vauxhall has fitted anti-theft locks to its factory radios since the mid-1990s. Any loss of 12V power triggers the lock instantly. The security system is embedded in the firmware of units supplied by Delphi and Blaupunkt — the two main OEM suppliers for Insignia-era radios — and it cannot be circumvented without the correct code. Serial prefixes typically start with BE or BP, which are unique to Vauxhall/Opel sourcing.
Finding the Serial Number on a Vauxhall Insignia
Display method (recommended — no tools needed)
- Turn the ignition to accessory (position I) so the radio is powered and shows CODE.
- Press and hold preset buttons AM and FM (or BND on some units) simultaneously for around two seconds.
- Alternatively, hold button 1 and 6 together on CD30/CD300 radios until the serial appears.
- Write down the full serial — it begins with BE or BP and is typically 12–14 characters long.
Physical removal method
- Remove the Insignia's centre console surround using trim tools — the Insignia A has a large infotainment fascia that clips in place.
- Unscrew or release the head unit and pull it forward.
- The serial is on a label on the top or side of the unit.
- Refit the radio once you have the number.
Getting Your Insignia Radio Code Online
Enter your BE or BP serial number into the order form, specify Vauxhall Insignia, and your four-digit code will be emailed to you within minutes. The codes are drawn from Delphi and Blaupunkt's original records. No dealership, no waiting in a phone queue. Browse all supported Vauxhall models here.
How to Enter the Code — Vauxhall Button Method
- Power on the radio with the ignition in accessory — it must show CODE.
- Press button 1 repeatedly until the first digit of your code is shown on the left of the display.
- Repeat for buttons 2, 3, and 4 for the remaining three digits.
- Press button 5 (or the confirmation button, sometimes labelled OK or ►) to confirm.
- The radio unlocks and plays normally if the code is correct.
Insignia Generations and Radio Fitment
Three generations of Insignia were sold in the UK across a fourteen-year run, and the radio hardware evolved significantly. The following table summarises the typical fitments.
| Generation | Years | Typical Radios | Serial Prefix | OEM Supplier |
|---|---|---|---|---|
| Insignia A | 2008–2013 | CD 300 / CD 400 / Navi 600/900 | BE / BP | Delphi / Blaupunkt |
| Insignia A facelift | 2013–2017 | CD 300 / Navi 600 / Navi 900 | BE / BP | Delphi / Blaupunkt |
| Insignia B | 2017–2022 | CD 400 / Navi 900 / IntelliLink | BE / BP | Delphi |
The Insignia B switched to a larger touchscreen IntelliLink system on higher trims — code entry on those units is done via the touchscreen keypad rather than the physical presets.
Troubleshooting Error Messages
- CODE — Normal prompt. The unit is awaiting your input.
- WAIT — Temporary lockout after wrong attempts. Leave the ignition on until the message clears — typically one hour.
- LOCKED — The radio has entered an extended lockout. Do not switch the ignition off; keep it in accessory mode.
- ERR — The last code entry was rejected. Wait for the lockout timer to expire before trying again.
Vauxhall radios impose a temporary lockout rather than a permanent one — you will never lose the radio permanently, so there is no need to rush. Enter the code carefully and methodically.
Frequently Asked Questions
What does the BE or BP prefix mean on a Vauxhall Insignia serial number?
BE and BP are Vauxhall/Opel's OEM serial prefixes used by their Delphi and Blaupunkt suppliers. They identify the radio as belonging to the Vauxhall supply chain, which is important when looking up codes in the manufacturer's database.
How long does it take to receive an Insignia radio code?
Most codes are delivered by email within two to five minutes of ordering, provided the serial number is entered correctly. In some cases involving older prefixes it may take slightly longer.
Can I enter the Vauxhall Insignia code without the ignition on?
No. The head unit must be powered and displaying CODE before it will accept any input. Turn the key to accessory position without starting the engine.
My Insignia has a touchscreen — is entry different?
Yes. On Insignia B models with IntelliLink, the screen displays a numerical keypad when locked. Tap each digit of your code on the touchscreen and confirm when prompted.
I replaced the battery myself — is that why it locked?
Yes. Any interruption to the power supply triggers the anti-theft lock. It is entirely normal and does not indicate any fault with the radio or the new battery.
Ready to unlock your stereo? Order your Vauxhall Insignia radio code here — it arrives in your inbox in minutes.