Volvo V70 Radio Code — Unlock It Online

Your Volvo V70's radio display is blank or showing a lock symbol after a battery change — don't worry, this is normal behaviour for Volvo's anti-theft system. The HU-series head unit (used in both the V70 II and V70 III) locks itself whenever it loses power, and to unlock it you need a four-digit code matched to the unit's serial number. You can get that code online in minutes.

Why Does the Volvo V70 Radio Lock?

Volvo has fitted its vehicles with radio security codes since the late 1990s. The moment the battery is disconnected or loses charge, the Clarion or Philips/Harman-made HU-series unit registers the power loss and locks. This anti-theft measure means a radio removed from the car is useless without the matching serial-linked code. Both generations of V70 — the P2 platform (1997–2007) and the P3 platform (2007–2016) — are affected.

Finding the Serial Number on Your Volvo V70

On the V70, the serial number is printed on a white label on the body of the head unit. To access it, you will need to remove the unit from the dashboard:

• V70 II (1997–2007): The HU-403 or HU-613 unit is held in the centre console by a plastic surround. Carefully prise away the surrounding trim panel and unscrew the head unit to slide it forward. The serial label is on the top or rear of the casing.
• V70 III (2007–2016): The HU-650, HU-803, or HU-850 unit is integrated into the centre stack. Use a trim removal tool around the fascia surround, then unplug the connectors to slide the unit out far enough to read the serial label on its side.

Note the complete serial number before replacing the unit. Then order your Volvo V70 radio code here to receive the unlock code by e-mail within minutes.

How to Get Your Volvo V70 Radio Code

1. Remove the head unit or use the on-screen diagnostic menu (where available) to find the serial number.
2. Visit MyRenaultRadioCode.com, enter the serial number and your e-mail address on the order form.
3. Complete secure payment; your four-digit code is sent immediately.
4. Refit the radio if removed, switch on the ignition, and enter the code using the touchscreen or buttons.

How to Enter the Code on a Volvo V70

Both V70 generations use a touchscreen or a combination of physical buttons for code entry:

• V70 II with HU-403 / HU-613: The unit will display a code prompt after power is restored. Use the station preset buttons (1–4) to enter each digit in sequence; press a dedicated OK or Seek button to confirm each digit, then confirm the final digit to unlock.
• V70 III with HU-650 / HU-803 / HU-850 or RTI / Sensus: A numeric keypad or touchscreen prompt appears when the unit requests a code. Tap each digit of the four-digit code on the display, then press OK or Enter to confirm.

Volvo V70 Generations: Radio and Manufacturer Overview

Generation	Years	Typical Head Unit	OEM Manufacturer	Entry Method
V70 II (P2)	1997–2007	HU-403 / HU-613	Clarion / Philips	Preset buttons 1–4 + OK
V70 III (P3)	2007–2016	HU-650 / HU-803 / HU-850 / RTI	Clarion / Denso / Harman	Touchscreen

Troubleshooting Volvo V70 Radio Issues

• Blank screen after battery change: Switch on the ignition (position II) and wait for the unit to boot. A code entry prompt should appear within 30 seconds.
• Wrong code entered: If you enter an incorrect code, the unit may impose a short delay before another attempt. Always double-check the code before entering.
• Sensus Connect (late V70 III): The very latest V70 III models fitted with Sensus Connect may use a software-based unlock tied to the VIN rather than a standalone serial code. If the on-screen prompt accepts a PIN directly, you need the correct four digits; if it asks for a dealer reset, a Volvo workshop can assist.
• RTI navigation unit: If your V70 III has the RTI satellite navigation fitted, the HU-850/RTI head unit is still code-protected and uses the same serial-based unlock process described above.

Frequently Asked Questions

Where is the serial number on a Volvo V70 radio?

The serial number is on a white sticker on the body of the head unit — usually on the top or side. On V70 II models the unit can be accessed once you remove the surrounding centre console trim. On V70 III models, carefully prise away the fascia surround and slide the unit out slightly to read the label.

Is there a way to find the serial number without removing the radio?

On some V70 III models with the HU-850 or Sensus system, navigate to Settings → System Information via the touchscreen or Sensus menu — the unit's serial may be listed there, saving you from a physical removal.

How long does it take to get a Volvo V70 radio code online?

Once you submit your serial number and complete payment on MyRenaultRadioCode.com, the code is delivered by e-mail within minutes. Most customers unlock their radio within 10–15 minutes from start to finish.

My V70 II radio shows a lock icon — what do I do?

Switch the ignition to position II (accessories on). The lock icon means the unit is waiting for a valid code. Enter your four-digit unlock code using the preset buttons as described above. If the icon persists after a correct entry, switch the ignition off and on again and try once more.

Will a V70 radio code from a dealer cost more?

Dealers typically charge a labour fee and can take several days to retrieve the code from Volvo's systems. Ordering online via MyRenaultRadioCode.com is faster and significantly cheaper — and the code is the same four digits either way. Get your code here.